Just discovered.. - Gunner Forum
Gunner Forum

Just discovered..

This is a discussion on Just discovered.. within the Gun Talk forums, part of the Gunner Forum category; Well,I was looking thru Youtube and came upon this: https://www.youtube.com/watch?v=2ODX5DmzHGc I found the video and another one to be of interest as I have three ...


Go Back   Gunner Forum > Gunner Forum > Gun Talk

Reply
 
LinkBack Thread Tools Display Modes
Old 02-10-2017, 04:16 AM   #1
Senior Member
 
KimberLover's Avatar
 
Joined: Sep 2013
From: Winston Salem, NC
Posts: 991
Just discovered..

Well,I was looking thru Youtube and came upon this:
https://www.youtube.com/watch?v=2ODX5DmzHGc
I found the video and another one to be of interest as I have three of these Sigs.
The second video :
https://www.youtube.com/watch?v=Qiz0YYuPqGY
I thought at first the problems were going to be catastrophic, but the problems as shown were really normal upkeep that any gun owner would recognize while cleaning a gun.
Anyway, I thought sharing this info would be interesting to anyone that owns a P938.
KimberLover is offline  
Register

Welcome to Gunner Forum - a friendly gun forum for gun owners.

We welcome everyone and the community is free to join so register today and become part of the Gunner Forum family!

Old 02-10-2017, 05:06 AM   #2
Senior Member
 
tx gun runner's Avatar
 
Joined: Jun 2008
From: Ft Hood , Tx area
Posts: 11,326
These things can't happen to a Glock . Glock is a dry gun no oil need to fire 10,000 rds or cleaning , plus plastic DON"T rust . Too much oil in a Glock is a bad thing and OIL on firing pin or striker channel is a NO NO . My carry gun I carry dry so no dirt sticks to it . I will lube it if I go the range and shoot over 50 rounds just to cut any blue wear marks .

https://www.youtube.com/watch?v=IyWu1KjIZpc

https://www.youtube.com/watch?v=fD8Fy2TS6w0
tx gun runner is offline  
Old 02-10-2017, 07:43 AM   #3
Senior Member
 
north country gal's Avatar
 
Joined: Jan 2013
From: northern wisconsin
Posts: 5,840
Thanks, KL. Never had that issue with my 938, but won't be an issue, now, because I've sold it and gone back to revolvers for all my carry work. Not saying revolvers are better. It's just that they are a better fit for my personality and shooting tastes. Bottom feeders for me are now just range guns.
north country gal is offline  
 
Old 02-10-2017, 08:20 AM   #4
Senior Member
 
bearcatter's Avatar
 
Joined: Aug 2015
From: Virginia
Posts: 1,870
[QUOTE=north country gal;281929] Not saying revolvers are better.... QUOTE]

Aw, go ahead and say it. I think revolvers are better!......
bearcatter is offline  
Old 02-11-2017, 09:26 PM   #5
Senior Member
 
Machinist's Avatar
 
Joined: Feb 2009
From: McKinney, TX
Posts: 8,861
Machinist is offline  
Old 02-12-2017, 05:34 AM   #6
Super Moderator
 
Terry_P's Avatar
 
Joined: Apr 2008
From: NH
Posts: 7,792
Everyone knows revolvers have soul whereas semi auto's, with the exception of the 1911, have none.
Terry_P is online now  
Old 02-12-2017, 08:32 AM   #7
Senior Member
 
north country gal's Avatar
 
Joined: Jan 2013
From: northern wisconsin
Posts: 5,840
Okay, it's no secret about me and revolvers, but I don't want to start anything. I'll just say that revolvers are best for me and my needs. I'll let others choose what works for them.

By the way, Dirty Harry has nothing on me.

Last edited by north country gal; 02-12-2017 at 08:35 AM.
north country gal is offline  
Old 02-12-2017, 11:29 AM   #8
Senior Member
 
tx gun runner's Avatar
 
Joined: Jun 2008
From: Ft Hood , Tx area
Posts: 11,326
I can't believe you sold a 3 screw .
tx gun runner is offline  
Old 02-12-2017, 01:07 PM   #9
Senior Member
 
north country gal's Avatar
 
Joined: Jan 2013
From: northern wisconsin
Posts: 5,840
Not a mistake I'll make, again. In the meantime, my 5 1/2" fits a bit better and is every bit as accurate.
north country gal is offline  
Old 02-13-2017, 06:21 AM   #10
Senior Member
 
tx gun runner's Avatar
 
Joined: Jun 2008
From: Ft Hood , Tx area
Posts: 11,326
Sight radius and few more fps is not that important to me on 7 1/2" over a 5 1/2" . Most 4" in my opinion are just a accurate as a 7 1/2" if shot in a machine gun vice . These are my cowboy loads to shoot on steel so they are loaded for 750 fps and not for accuracy .



I had two 7 1/2 and only 3 numbers apart and cut one barrel to 3 1/2 .




Last edited by tx gun runner; 02-13-2017 at 06:25 AM.
tx gun runner is offline  
Old 02-13-2017, 06:53 AM   #11
Senior Member
 
north country gal's Avatar
 
Joined: Jan 2013
From: northern wisconsin
Posts: 5,840
I agree on the 5 1/2" versus 7 1/2" on the accuracy I get with my shooting. Just not worth messing with the longer barrel for the sake of a few more fps. Much prefer the handling and balance of the shorter barrels. If I need more fps out of a 357, 44 mag, 45 Colt and so on, I'll just grab one of the Marlins. Like a revolver, a lever gun always works.

This little 6 pound beauty holds 9 357s.

Last edited by north country gal; 02-13-2017 at 07:09 AM.
north country gal is offline  
Old 02-13-2017, 08:44 AM   #12
Senior Member
 
bearcatter's Avatar
 
Joined: Aug 2015
From: Virginia
Posts: 1,870
[QUOTE=bearcatter;281953]
Quote:
Originally Posted by north country gal View Post
Not saying revolvers are better.... QUOTE]

Aw, go ahead and say it. I think revolvers are better!......
I may have a slight reservation on that, now that my LCR broke badly...
bearcatter is offline  
Reply

  Gunner Forum > Gunner Forum > Gun Talk

Thread Tools
Display Modes



Top Gun Sites Top Sites List


Powered by vBulletin 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright © 2008-2012 Gunner Forum. All rights reserved.