Reorganized my reloading factory

CDRGlock · 09-06-2018, 04:07 PM

I have been reloading for a few years now, starting out with just 45 ACP, then 357 Magnum. My friend introduced me to 44 Magnum, gave me his Dillon 450 with the S&W 629 PC that he sold me. I became hooked on recoil.

I started reloading 454 Casull, 460 S&W and 500 S&W on a single stage. To facilitate a faster process, I have separate powder drops for 500 Magnum x 2 (500 grain bullets, 350 grain bullets), 454 Casull and 460.

One day I was talking to a new friend saying I wanted one of those automated reloading machines that I saw for around $3k. She said she wanted to sell her Dillon 550, so after a good deal, I decided to jump on it.

However, I was “out of space”. My desk had 3 presses already but the other side of the desk was unused and had wasted space. So I turned it in my basement workshop so I can have more working room....

So here is house 1/4 of the workroom looks...

The advantage is that each station has a load I can specifically work on in a few minutes.

The disadvantage is that I see space for two more progressive presses.

UPDATE:

Updated to add an RCBS turret press for rifle ammunition.

I’ve been reloading 9 mm so it has been cluttered on the desk.

Sent from my iPad using Tapatalk Pro

CDRGlock · 09-15-2018, 06:50 PM

Ok, so I organized everything, finally.

I put all Brass, primers, and bullets next to each press. The primer tubes in the center with the primer tray. The manual is on the edge of the bench. I have others to put there, too (Hornady, Speer, and Lyman).

The tumblers are on the ground since one time it tumbled off of the bench. I decided it was best to put them in a corner.

Sent from my iPhone using Tapatalk Pro

Machinist · 09-15-2018, 06:59 PM

Quite a set up! Impressive.

gemihur · 09-15-2018, 07:18 PM

sweet, man!

KimberLover · 09-16-2018, 04:20 AM

Reload Factory is right!

RidgeRunner · 09-16-2018, 06:44 AM

Awesome!

tx gun runner · 09-16-2018, 08:16 AM

Love it ......

44s Rock · 09-16-2018, 08:48 AM

Quote:

Originally Posted by Machinist

Quite a set up! Impressive.

+1

Terry_P · 09-16-2018, 02:05 PM

How many rounds a week do you go thru? Looks like you can make a pile of them real quick. Great set up.

CDRGlock · 09-16-2018, 04:58 PM

Quote:

Originally Posted by Terry_P

How many rounds a week do you go thru? Looks like you can make a pile of them real quick. Great set up.

1500 probably.

I went 4-5 times a week since spring. Then again, I have a range in my backyard.

This was before I added more targets.

Sent from my iPad using Tapatalk Pro

tonyjr · 09-21-2018, 04:00 PM

Nice
I have a car , key machines , grinder , drill press , vises , 4 tool roll a round boxes
8 intermedite and 4 tool chest on top .
Be nice to just reload , but -

09-06-2018, 04:07 PM	#1
CDRGlock Member Joined: Sep 2017 From: Virginia Posts: 30	Reorganized my reloading factory I have been reloading for a few years now, starting out with just 45 ACP, then 357 Magnum. My friend introduced me to 44 Magnum, gave me his Dillon 450 with the S&W 629 PC that he sold me. I became hooked on recoil. I started reloading 454 Casull, 460 S&W and 500 S&W on a single stage. To facilitate a faster process, I have separate powder drops for 500 Magnum x 2 (500 grain bullets, 350 grain bullets), 454 Casull and 460. One day I was talking to a new friend saying I wanted one of those automated reloading machines that I saw for around $3k. She said she wanted to sell her Dillon 550, so after a good deal, I decided to jump on it. However, I was “out of space”. My desk had 3 presses already but the other side of the desk was unused and had wasted space. So I turned it in my basement workshop so I can have more working room.... So here is house 1/4 of the workroom looks... The advantage is that each station has a load I can specifically work on in a few minutes. The disadvantage is that I see space for two more progressive presses. UPDATE: Updated to add an RCBS turret press for rifle ammunition. I’ve been reloading 9 mm so it has been cluttered on the desk. Sent from my iPad using Tapatalk Pro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Gunner Forum Discussions
Thread	Thread Starter	Forum	Replies	Last Post
I'm Reloading Less Than I Had Planned	billt	Reloading	7	11-29-2017 06:39 AM
reloading room	hoosierman	Reloading	12	09-03-2017 05:24 PM
Great deal on a RCBS reloading kit	moakes58	Reloading	2	11-26-2016 12:06 PM
Reloading 50 AE w / Lee master	tonyjr	Reloading	4	07-30-2016 06:37 AM
Nice factory Colt SAA grips, $40	bearcatter	Gun Gear	0	07-21-2016 09:13 AM

09-15-2018, 06:50 PM	#2
CDRGlock Member Joined: Sep 2017 From: Virginia Posts: 30	Ok, so I organized everything, finally. I put all Brass, primers, and bullets next to each press. The primer tubes in the center with the primer tray. The manual is on the edge of the bench. I have others to put there, too (Hornady, Speer, and Lyman). The tumblers are on the ground since one time it tumbled off of the bench. I decided it was best to put them in a corner. Sent from my iPhone using Tapatalk Pro

09-15-2018, 06:59 PM	#3
Machinist Senior Member Joined: Feb 2009 From: McKinney, TX Posts: 8,994	Quite a set up! Impressive.

09-15-2018, 07:18 PM	#4
gemihur Member Joined: Nov 2016 From: VA Posts: 48	sweet, man!

09-16-2018, 04:20 AM	#5
KimberLover Senior Member Joined: Sep 2013 From: Winston Salem, NC Posts: 1,142	Reload Factory is right!

09-16-2018, 06:44 AM	#6
RidgeRunner Senior Member Joined: Nov 2015 From: Buck Ridge, Georgia Posts: 3,355	Awesome!

09-16-2018, 08:16 AM	#7
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	Love it ......

09-16-2018, 02:05 PM	#9
Terry_P Super Moderator Joined: Apr 2008 From: Where it's warm Posts: 10,356	How many rounds a week do you go thru? Looks like you can make a pile of them real quick. Great set up.

09-21-2018, 04:00 PM	#11
tonyjr Member Joined: Dec 2015 From: Calif Posts: 78	Nice I have a car , key machines , grinder , drill press , vises , 4 tool roll a round boxes 8 intermedite and 4 tool chest on top . Be nice to just reload , but -