bootleg shotgun

tx gun runner · 08-18-2014, 02:17 AM

A 303 must have

https://www.youtube.com/watch?v=ExWX9_lWUPI

http://www.taylorsfirearms.com/1887-...-5-barrel.html

tx gun runner · 08-18-2014, 02:56 AM

You can buy this one at 1/3 the cost and cut the stock yourself . The cowboy shooter made a kit to speed up loading it if anyone is interested .

http://www.gunbroker.com/Auction/Vie...Item=435919831

take down

http://marauder.homestead.com/files/Model_87dis.html

tx gun runner · 08-18-2014, 03:09 AM

And here is the way to do the Terminal Twirl . The video is with a airsoft gun .

https://www.youtube.com/watch?v=we_p0B-WitY

303Lithgow · 08-18-2014, 05:17 AM

I like them. Can you cut down the stock and still be legal?

north country gal · 08-18-2014, 06:23 AM

I'm surprised you don't already have one, 303.

Darned if that wouldn't make a good carry gun for bear defense. Hmmmm!

tx gun runner · 08-18-2014, 08:22 AM

Quote:

Originally Posted by 303Lithgow

I like them. Can you cut down the stock and still be legal?

Remember the Bootlegger is a Shotgun where the Mares Leg is a pistol

http://en.wikipedia.org/wiki/Sawed-off_shotgun

United States
Under the National Firearms Act (NFA), it is illegal for a private citizen to possess a sawed-off modern smokeless powder shotgun (a shotgun with a barrel length shorter than 18 inches (46 cm) or an overall length shorter than 26 inches (66 cm)) (under U.S.C. Title II), without a tax-paid registration

tx gun runner · 08-18-2014, 08:36 AM

Quote:

Originally Posted by north country gal

I'm surprised you don't already have one, 303.

Darned if that wouldn't make a good carry gun for bear defense. Hmmmm!

That gun has a lot of hiccups . I've never seen one that run smooth in matches . They don't jam but and you need to a lot of force and don't like being babied . The original one are 10 ga .

north country gal · 08-18-2014, 11:05 AM

I can see where a pump action with that kind of buttstock would be easier to operate. Looks like old Hicock45 even stumbled a bit with it.

gunjunkie · 08-18-2014, 11:59 AM

Quote:

Originally Posted by 303Lithgow

I like them. Can you cut down the stock and still be legal?

I'm pretty sure you can cut the barrel down to 18", but must keep the overall length at least 26", unless you get the ATF stamp.
I'll stick with my good ol 870 with a full stock.

303Lithgow · 08-18-2014, 12:41 PM

Quote:

Originally Posted by north country gal

I can see where a pump action with that kind of buttstock would be easier to operate. Looks like old Hicock45 even stumbled a bit with it.

I noticed that he had problems cycling it. Kind of makes me wonder.

north country gal · 08-18-2014, 12:49 PM

Don't know if it was a shortcoming of the design or a quality issue of the brand. Maybe both.

303Lithgow · 08-18-2014, 12:58 PM

Chiappa isn't known for their high quality.

tx gun runner · 08-19-2014, 06:43 AM

It is a fun gun ................ not for defense or hunting . It is great for blowing thing up .

https://www.youtube.com/watch?v=UisjxqqfIbo

303Lithgow · 08-19-2014, 07:01 AM

Quote:

Originally Posted by tx gun runner

It is a fun gun ................ not for defense or hunting . It is great for blowing thing up .

https://www.youtube.com/watch?v=UisjxqqfIbo

I could get into that. I noticed a lot of the comments said it was junk because it was made in China. Norinco makes some of the best firearms in the world in my opinion. The finish on them might not be too purdy but they function perfect. My 1897 Trench Gun is an example of that.

tx gun runner · 08-20-2014, 07:29 AM

Those guns need to be broke in . Take all the oil and grease out gun and open and close action for a hour or so when watching TV till it smooth up . Take it a part clean oil it should be ok from then on. And remember the last shot in 1887 gun don't eject well . I didn't catch the in one video but they were loading it 1 round at a time . That was there problem not the gun .

08-18-2014, 02:17 AM	#1
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	bootleg shotgun A 303 must have https://www.youtube.com/watch?v=ExWX9_lWUPI http://www.taylorsfirearms.com/1887-...-5-barrel.html

08-18-2014, 02:56 AM	#2
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	You can buy this one at 1/3 the cost and cut the stock yourself . The cowboy shooter made a kit to speed up loading it if anyone is interested . http://www.gunbroker.com/Auction/Vie...Item=435919831 take down http://marauder.homestead.com/files/Model_87dis.html Last edited by tx gun runner; 08-18-2014 at 02:59 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Gunner Forum Discussions
Thread	Thread Starter	Forum	Replies	Last Post
Only took me 2 yrs to shoot it	tx gun runner	Black Powder Handguns	5	06-07-2013 02:47 PM
another shoot........	deputy125	Range Reports	9	11-13-2010 08:35 AM
Anyone ever shoot these???	JOHNNY WACKO	Ammunition	11	12-16-2009 04:43 PM
Why I shoot HP out of my 45	tx gun runner	Range Reports	5	11-23-2009 01:50 PM
shoot 'em	jimbo1096	Gun Talk	0	09-04-2008 06:26 PM

bootleg shotgun

legal barrel limits

shotgun bootleg variations

08-18-2014, 03:09 AM	#3
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	And here is the way to do the Terminal Twirl . The video is with a airsoft gun . https://www.youtube.com/watch?v=we_p0B-WitY

08-18-2014, 05:17 AM	#4
303Lithgow Senior Member Joined: Jan 2012 From: Washington State Posts: 16,373	I like them. Can you cut down the stock and still be legal?

08-18-2014, 06:23 AM	#5
north country gal Senior Member Joined: Jan 2013 From: northern wisconsin Posts: 5,999	I'm surprised you don't already have one, 303. Darned if that wouldn't make a good carry gun for bear defense. Hmmmm!

08-18-2014, 11:05 AM	#8
north country gal Senior Member Joined: Jan 2013 From: northern wisconsin Posts: 5,999	I can see where a pump action with that kind of buttstock would be easier to operate. Looks like old Hicock45 even stumbled a bit with it.

08-18-2014, 12:49 PM	#11
north country gal Senior Member Joined: Jan 2013 From: northern wisconsin Posts: 5,999	Don't know if it was a shortcoming of the design or a quality issue of the brand. Maybe both.

08-18-2014, 12:58 PM	#12
303Lithgow Senior Member Joined: Jan 2012 From: Washington State Posts: 16,373	Chiappa isn't known for their high quality.

08-19-2014, 06:43 AM	#13
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	It is a fun gun ................ not for defense or hunting . It is great for blowing thing up . https://www.youtube.com/watch?v=UisjxqqfIbo

08-20-2014, 07:29 AM	#15
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	Those guns need to be broke in . Take all the oil and grease out gun and open and close action for a hour or so when watching TV till it smooth up . Take it a part clean oil it should be ok from then on. And remember the last shot in 1887 gun don't eject well . I didn't catch the in one video but they were loading it 1 round at a time . That was there problem not the gun .