New grips

north country gal · 06-07-2013, 02:49 PM

I do like those. Very classy.

RetiredSeabee · 06-07-2013, 05:55 PM

They really look great.

303Lithgow · 06-07-2013, 06:00 PM

Nice. What did the old grips look like?

tx gun runner · 06-07-2013, 07:42 PM

Quote:

Originally Posted by 303Lithgow

Nice. What did the old grips look like?

There for sale ... The white ones are Hogue Micarta not plastic with Ruger medallion .

http://www.midwayusa.com/product/574...-micarta-white

Terry_P · 06-09-2013, 06:26 AM

TGR:

I have the later model BH with the lock so suspect they aren't the ones as they specify no lock in the ad. Too bad they look excellent.

tx gun runner · 06-09-2013, 06:54 AM

Quote:

Originally Posted by Terry_P

TGR:

I have the later model BH with the lock so suspect they aren't the ones as they specify no lock in the ad. Too bad they look excellent.

Here is the part# for one with lock . Now if you don't like the medallion you order them from Altamont who makes them for Ruger but they will cost you $10 more .

http://shopruger.com/New-Vaquero-Ros...uctinfo/19872/

http://www.altamontco.com/experiment...er_vaquero.php

303Lithgow · 06-09-2013, 09:22 AM

Quote:

Originally Posted by Terry_P

TGR:

I have the later model BH with the lock so suspect they aren't the ones as they specify no lock in the ad. Too bad they look excellent.

That is the way it is with the Vaquero.

KS95B40 · 06-10-2013, 09:23 AM

I changed grips on my .30 carbine Blackhawk. Wanted a set that filled my hand better but just don't like the looks of rubber on a single action.

I probably would not have picked the scroll design but for $25...

NOS Eagle grips

Machinist · 06-10-2013, 10:06 AM

They look good! They really change the appearance of the big Ruger. I really dislike engraving or decoration on steel or wood but I do like checkering. Smooth grips feel fine until my hands sweat and then I don't feel secure. Those look good and look functional as well.

tx gun runner · 06-11-2013, 09:31 PM

KS95B40 I like the grips they are pretty , but SASS /CAS don't allow them in there shoots . The birdshead fit me better with the SBH hammer thinned if I shoot and cock gun with 1 hand . If I shot 2 handed the plow handles with the SBH hammer thinned work good for me . If you like that grip you should look into the Bisley grip frame in your next gun . It is too large for me . The 30 carbine is one of my favorite cal in a SA Ruger .

http://images.search.yahoo.com/searc...r+bisley+grips

303Lithgow · 06-11-2013, 10:03 PM

Quote:

Originally Posted by tx gun runner

KS95B40 I like the grips they are pretty , but SASS /CAS don't allow them in there shoots . The birdshead fit me better with the SBH hammer thinned if I shoot and cock gun with 1 hand . If I shot 2 handed the plow handles with the SBH hammer thinned work good for me . If you like that grip you should look into the Bisley grip frame in your next gun . It is too large for me . The 30 carbine is one of my favorite cal in a SA Ruger .

http://images.search.yahoo.com/searc...r+bisley+grips

Ruger made a pistol in 30 Carbine? As in M1 Carbine ammo?

tx gun runner · 06-11-2013, 10:40 PM

Quote:

Originally Posted by 303Lithgow

Ruger made a pistol in 30 Carbine? As in M1 Carbine ammo?

Yes for over 30 yrs ...... The 32-20 pistols I sold you are a rimmed 30 carbine and some 32-20 brass will fit in some of the Ruger 30 carbine pistol . The 2 cal are 2 peas in a pod . 32-20 is .310 and 30 car is .308 .

303Lithgow · 06-12-2013, 01:13 PM

Quote:

Originally Posted by tx gun runner

Yes for over 30 yrs ...... The 32-20 pistols I sold you are a rimmed 30 carbine and some 32-20 brass will fit in some of the Ruger 30 carbine pistol . The 2 cal are 2 peas in a pod . 32-20 is .310 and 30 car is .308 .

Too bad I couldn't shoot 30 Carbine in the 32-20. I have a lot of it.

Terry_P · 06-12-2013, 01:57 PM

KS95B40:

Do you hunt with that rig? If so what do you go after.

Terry_P · 06-12-2013, 02:05 PM

Quote:

Originally Posted by 303Lithgow

Ruger made a pistol in 30 Carbine? As in M1 Carbine ammo?

I remember shooting one way back that my wifes great uncle had. He handed it to me and see if you can hit he barrel. I said the BBL (55 gal drum) as it wasn't far away and had a muffler and piece of tailpipe hanging out the top. He said yes so I hit the BBL. He then said the muffler. I hit the muffler and he said the pipe. I missed the stinkin pipe. It was a Blackhawk and had to be 40 years ago.

tx gun runner · 06-12-2013, 03:11 PM

Quote:

Originally Posted by 303Lithgow

Too bad I couldn't shoot 30 Carbine in the 32-20. I have a lot of it.

The 30 carbine factory ammo is super loud in a pistol it is loaded for 18" rifle . The 32-20 ammo you have is the same load I shot in my Ruger 30 carbine pistol and is not loud .

303Lithgow · 06-12-2013, 03:54 PM

Quote:

Originally Posted by tx gun runner

The 30 carbine factory ammo is super loud in a pistol it is loaded for 18" rifle . The 32-20 ammo you have is the same load I shot in my Ruger 30 carbine pistol and is not loud .

It wouldn't even fit though would it? And the pressures would be too high.

Machinist · 06-12-2013, 04:33 PM

They are not far off. 32-20 / .30 Carbine

Base dia. .354 / .354
Neck dia. .327 / .331
Case len. 1.315 / 1.290

The rim would seem the issue.

303Lithgow · 06-12-2013, 06:04 PM

Quote:

Originally Posted by Machinist

They are not far off. 32-20 / .30 Carbine

Base dia. .354 / .354
Neck dia. .327 / .331
Case len. 1.315 / 1.290

The rim would seem the issue.

How about the pressures from military 30 Carbine ammo?

06-07-2013, 02:47 PM	#1
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	New grips

06-10-2013, 09:23 AM	#9
KS95B40 Senior Member Joined: Apr 2013 From: Kansas Posts: 519	Eagle Grips I changed grips on my .30 carbine Blackhawk. Wanted a set that filled my hand better but just don't like the looks of rubber on a single action. I probably would not have picked the scroll design but for $25... NOS Eagle grips

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Gunner Forum Discussions
Thread	Thread Starter	Forum	Replies	Last Post
Grips are on the way	Snuffy	Single Action Revolvers	5	03-31-2011 09:50 PM
My new grips	XLCH	Gun Pictures	18	08-15-2010 04:37 PM
Grips	XLCH	Gun Gear	10	06-17-2010 05:50 AM
Grips from 41	XLCH	Gun Pictures	16	06-08-2009 02:18 PM

New grips

44 mag auto mag

altamont grips

bersa grips

eagle grips vs altamont

[email protected]

grips for automag 30 carbine pistol

micarta pistol grips walther 32

new grips or stocks for smith and wessen model 49 38 special revolver gun

ruger buckeye .32-20 revolver

single action revolver pistol grips

white micarta blackhawk grips

white micarta grips

06-07-2013, 02:49 PM	#2
north country gal Senior Member Joined: Jan 2013 From: northern wisconsin Posts: 6,001	I do like those. Very classy.

06-07-2013, 05:55 PM	#3
RetiredSeabee Super Moderator Joined: Dec 2012 From: Harrisburg, North Carolina Posts: 4,277	They really look great.

06-07-2013, 06:00 PM	#4
303Lithgow Senior Member Joined: Jan 2012 From: Washington State Posts: 16,373	Nice. What did the old grips look like?

06-09-2013, 06:26 AM	#6
Terry_P Super Moderator Joined: Apr 2008 From: Where it's warm Posts: 10,616	TGR: I have the later model BH with the lock so suspect they aren't the ones as they specify no lock in the ad. Too bad they look excellent.

06-10-2013, 10:06 AM	#10
Machinist Senior Member Joined: Feb 2009 From: McKinney, TX Posts: 8,994	They look good! They really change the appearance of the big Ruger. I really dislike engraving or decoration on steel or wood but I do like checkering. Smooth grips feel fine until my hands sweat and then I don't feel secure. Those look good and look functional as well.

06-11-2013, 09:31 PM	#11
tx gun runner Senior Member Joined: Jun 2008 From: Ft Hood , Tx area Posts: 11,626	KS95B40 I like the grips they are pretty , but SASS /CAS don't allow them in there shoots . The birdshead fit me better with the SBH hammer thinned if I shoot and cock gun with 1 hand . If I shot 2 handed the plow handles with the SBH hammer thinned work good for me . If you like that grip you should look into the Bisley grip frame in your next gun . It is too large for me . The 30 carbine is one of my favorite cal in a SA Ruger . http://images.search.yahoo.com/searc...r+bisley+grips

06-12-2013, 01:57 PM	#15
Terry_P Super Moderator Joined: Apr 2008 From: Where it's warm Posts: 10,616	KS95B40: Do you hunt with that rig? If so what do you go after.

06-12-2013, 04:33 PM	#19
Machinist Senior Member Joined: Feb 2009 From: McKinney, TX Posts: 8,994	They are not far off. 32-20 / .30 Carbine Base dia. .354 / .354 Neck dia. .327 / .331 Case len. 1.315 / 1.290 The rim would seem the issue.